| Model Number | T252 |
|---|---|
| Condition | New |
| CNC or Not | Normal |
| Power Source | Pneumatic |
| Origin | Mainland China |
| Certification | NONE |
5 Inch Automatic Punching Woodworking Tools Drill Bit Electric Tools Metal Drills Center Pin Punch Spring Loaded Dent Marker
47.30 $
986 in stock
100 Brand new and high quality
Simple and accurate to use knurled handle prevents slipping.
Gives precise starting point on steel and other solid material
Allows you to easily mark work using one hand prior to drilling which will prevent the drill from slipping. Automatic spring loads then releases at top of cycle with force to create center punch No Hammer Needed
Spring pressure can be adjusted by simply rotating the knurled top of the punch.
Material: Knurled steel body, Alloy steel point
Color: Mainly Gold
Total Length: Approx 13cm / 5 inch.
Handle Diameter: Approx 1.27cm / 0.5inch.
Notice:
1.Please allow 1-3cm error due to manual measurement, please make sure you do not mind before you bid.
2.The colors may have different as the difference display, please understand.
Inne produkty od tego sprzedawcy
Więcej podobnych produktów od innych sprzedawców
-
Sale!
USB Tester Voltage & Current Tester Voltmeter Capacity Current Meter Digital Multimeter Power Battery Meter Portable
Features: USB power tester can measure USB charging voltage, current and discharge capacity over time.OOTDTY USB power tester has designed with reset button, and you can press 3-5 seconds to make the screen cleared.Can easily measure the operating current of the output voltage of the USB port and equipment.Small size , no power , and other ancillary equipment, plug and play also detect USB charger output voltage and current are standard suitable for factories, Laboratory and users.Can be used to check the performance of USB cables, wall chargers, car chargers and power banks.Specification: Material: ABSSize: Input / Output [...]
44.93 $ -
Sale!
USB Tester Voltage Current Meter Digital Capacity Battery Charge Power Voltmeter Ammeter Multimeter Power Off Auto Save
USB Tester Voltage Current Meter Digital Capacity Battery Charge Power Voltmeter Ammeter Multimeter Power Off Auto SaveOOTDTY Features: USB power tester can measure USB charging voltage, current and discharge capacity over time. USB power tester has designed with reset button, and you can press 3-5 seconds to make the screen cleared. Can easily measure the operating current of the output voltage of the USB port and equipment. Small size , no power , and other ancillary equipment, plug and play also detect USB charger output voltage and current are standard suitable for factories, Laboratory and users. Can be used to [...]
45.00 $ -
Sale!
LCD Display Blue DC 60V 100A Balance Voltage Battery Power Analyzer for Home Electrical Instruments Supplies
Digital LCD Display Blue DC 60V 100A Balance Voltage Battery Power Analyzer Watt Meter Checker Balancer Charger RC Tools Features: 1. The digital LCD screen provides clear digital readings. 2. Intermittent treatment up to 100 amps and continuous operation at 50 amps. 3. Connect the load to the battery to provide real-time battery charge readings. 4. Process 0 to 60 volts. Suitable for 12, 24, 36 and 48 volt battery pack systems. 5. Very low power consumption is 7 mA. More efficient than any other instrument. 6. Measure energy wh, charge [...]
47.74 $ -
Sale!
HOPI HP-9800 Handheld Power Meter Power Analyzer LED Metering Socket Measurable Current-voltage Power Factor
114.93 $ -
Sale!
Original Japan Sanwa Laser Power Meter LP10 Environmental Meters
Measurement range CW laser: of wavelength to 400 ~ 1100 nm is available by factory default setting. Pocket size. Separate light sensor probe can be integrated with the main body for measurement. 4039 full-scale count with a bar graph display. Direct reading of the laser power of the reference wavelength of 633 nm, while the laser power of other wavelengths can be read by converting it according to the spectral sensitivity characteristic table. Wide measuring range from 0.01 μW to 40.39 mW. MIN/MAX hold functions. The diffusion sheets are used in the sensor, it can suppress the return light [...]
709.23 $ -
Sale!
PX144M5W RF Amplifier Module SMA Female Connector 144MHz Wideband High Gain Low Noise Amplifier Board Radio Frequency Receiver
RF Amplifier 5W SMA Female Connector Low Noise Green 144MHz Broadband Module Receiver Feature: 1. This RF low power amplifier is suitable for 144MHz transmission and is equipped with a heat sink, which can operate stably for a long time. You can use the RF amplifier with confidence. 2. The standard SMA female connector is suitable for connecting to most devices. The input is 0.1W and the output is 5.0W 7.2V. Giving you a good experience. 3. This product has a wide frequency range, high gain and low noise figure. Durable materials provide long‑term corrosion protection and can be [...]
63.41 $ -
Sale!
AD8310/AD8313/AD8317/AD8318 Logarithmic Detector Module RF Signal Log Output Power Meter 1-440MHz/1-8000MHz/1M-10GHz/0.1-2.5GHz
Logarithmic Detector RF Signal Log Output Power Meter Controller Feature: 1. This power meter is designed with for ADI's chip and used for RF signal power detection. 2. Detection frequency range is 1-440MHz, 1-8000MHz, 1M-10GHz, 0.1-2.5GHz, which can detect an RF signal with a power of -55dBm to -0dBm, and convert this RF signal into DC voltage output. 3. The greater the RF signal amplitude or power, the higher the output voltage, and the output voltage is proportional to the logarithm of the input signal amplitude, which expands the dynamic range of the detected signal by 55dB. [...]
54.58 $ -
Sale!
High Precision RC Watt Meter Power Analyzer Battery Voltage Amp Meter with LCD Digital Display 12V 24V Solar Wind Analyzer Power
Description: Professional RC Watt Meter is an excellent supplement to RC hobby, DC circuit, solar system, boat/RV and battery backup system! This is not just a watt meter-it is an all-in-one meter! Power meter, voltmeter, ampere hour meter, ammeter and electric energy meter. Everything is in one unit! This is a perfect troubleshooting tool. This all-in-one wattmeter is indispensable for the analysis, testing and troubleshooting of any DIY DC power supply project. Feature: ✔This digital watt meter is equipped with LCD screen which gives clear and accurate readings. ✔Measures 0 to 60 Volts. Works on 12, [...]
56.84 $ -
3000Pcs Staples For Hot Stapler Plastic Repair Wave Staples Bumper Bodywork Repairs 0.8Mm S Wave Staples
body { font-size: 75; color: #000; font-family: Open line-height: 1.3; } dl { margin: 0px; width: 480px; float: left; } dt { width: 100px; height: 15px; float: left; } dd { width: 240px; height: 15px; float: left; } dl dt { margin: 0px; line-height: 22px; color: #474747; font-size: 14px; font-family: tahoma; } #product-desc { width: 100; height: 209px; } #description { width: 100; height: 50; [...]
85.44 $ -
Sale!
2021-SEDY 28-Piece Transfer Punch Set, 3/32" – 1/2", Heat Treated Alloy Steel Forging
Selling Point Describe the details of the selling point above, attracting and prEach punch is a high quality heat treated alloy steel with durability and rust resistance of a black oxide film. Takes the guesswork out of transferring threaded, drilled or reamed machining, drilling operations Drilling punch set includes easy-to-see index stand to keep tools stacked and ready to pull Precision indexing punch for tool builders and mechanics Wide set of transfer punches from 3/32 to 1/2 by 1/64; includes 17/32 transfer punchoviding trust to your potential users. Selling Point Describe the details of the selling point above, attracting and [...]
94.28 $ -
Sale!
Drill Dust Cover Long Service Life Drill Dust Bowl Hole Saw Dust Catcher For Ceiling Accessories
Drill Dust Cover Long Service Life Drill Dust Bowl for Ceiling Feature: 1. SILICONE MATERIAL: The hole drill dust cover is made of silicone, which is soft, not easily deformed or broken, durable and easy to clean. 2. TRANSPARENT BOTTOM: The hole drilling dust cover adopts transparent bottom cover, so you can see the actual opening situation when reaming work. 3. ELASTIC SPRING: The spring of the hole drill dust cover has good elasticity, which can fit the wall well and achieve better dustproof effect. 4. REMOVABLE DESIGN: The hole drill dust [...]
52.36 $ -
Sale!
Heatbreak Tube 3D Printer Throat Tube Wear Resistant for Ender 3 S1 Pro
Heatbreak Tube 3D Printer Throat Tube Wear Resistant for Ender 3 S1 Pro Feature: 1. Applicable Models: This throat tube is suitable for Ender 3 S1, Ender3 S1 Pro, for CR 10 Smart Pro, for Sermoon V1, V1 pro 3D printer, check the model!2. Delicate Craftsmanship: The inner wall of this tube is smoothly without ink blocking, and the pumping resistance is small, providing stabler and smoother using.3. Ti Alloy Material: This tube made of Ti alloy is corrosion resistant, high temperature and wear resistant, strong and sturdy, ensures a long life span.4. Branch Design: Adopts branch design, [...]
52.04 $
Reviews
There are no reviews yet.