More than 95 of the ovens are suitable for this igniter. Check the parameter fan voltage 220V, solenoid valve voltage 24V, solenoid valve is 12V can also be used You can use this igniter! Features: used in gas water heaters, gas ovens applicable to New South, Dewey, Hongling, Honglian, Henglian, Mingtai, Bao, Xiangxing, Debao, Baozhu, Kitchen Po, Lijia, Nanguo Baoli Gas ovens, etc., with automatic ignition and fault alarm function, adopt American PIC chip, have stable performance, strong anti-interference ability, high reliability, safety and stability, and convenient system design. The pulse igniter is a gas oven control system, which is suitable for petroleum gas, gas, gas ignition and flame detection. The main technical indicators: gas oven special igniter, oven ignition accessories, gas oven firearms, pulse igniter use voltage: 220V/50Hz power consumption: ≤ 10W ignition high voltage; ≥ 12KV ignition distance: 3 ~ 5mm Operating environment: temperature – 20°C~60°C Humidity 95 or less Time error: ±0.5 Two groups of power output: DC24V solenoid valve output AC220V fan output size specification: 126×87×5439mm Mounting hole distance 74mm Function overview: Ignition power on At the same time, the sound and light prompts, while the pulse starts to ignite, the valve is opened after a delay of 1 second, and the ignition time is 8 seconds. At any time within 8 seconds of ignition time, the programmable controller detects the flame induction signal within 1 second and stops the ignition, and the circuit enters the normal combustion working state; if the intermittent flameout occurs within 8 seconds, the circuit continues to ignite until the ignition timing is 8 seconds. End. If you encounter unexpected fire extinguishing when you do not catch fire or burn at 8 seconds after power-on, immediately sound and light alarm until human intervention is restarted.