User Manual Lii-PD4

Cautions:

1.Thischarger can chargeallcylindricalrechargeablebatteries 3.7VLi-Ion,3.8VIMR,1.2VNi-MH/Cd, 3.2VLiFePO4

2.Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit

3.If DC input, only12V1Ais recommended

4.Mind heating while charging

5.Remove the charger from power source after charging complete, and remove the battery from the charger at the same time

6.For indoor use only

7.The displaying dataonly for reference, please refer to professional instrument for more accurate data

Specifications and functions:

1.Multi-powerinput: AC cable 110-240V 50/60Hz included/ 12V 1A adapterselective, four independent charging and micro computer management system.

2.Charge current intelligent auto-set of total three levels:500mA /1000mA/2000mA,2000mA is fixed only for slot#4.

3.Multi-functionalLCDchargingdisplay: forcharging progress25 – 50 – 75 -100,battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80VIMR, charging capacity, voltageandcurrent: 0.5A/1A/2A.

4.Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteriesIMR

5.Refresh for OV battery. Itwill not charge any battery of1.65 -2.20V refresh current can be detected only

6.Multi-safety protection function of over-charge and over-discharge,short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.

7.Chargingat constant voltage and current

Button and LCD :

1.Buttonof ModeChannel button:there are 4 independent buttons separately for each channel.Whilepower supplyis connectedand battery inserted,  1Short clickthechannelbuttonin 5Sto change the battery type. It will start to charge 5 seconds after setting the battery type 3.2V or 3.80V,  1.2V Ni-MH and 3.7V li-ion canbe detected automatically, so it needs setting only 3.2V and 3.8V batteries;

Note: Battery type can be only selective before charging starts.

2.LCD: Whilepower supply connected,the LCDwilllight upfor 3S:1 If no battery isinserted,the LCD will displaynulland will be off in 30S2 When battery isinserted anddetected,the LCD will show channel number while the battery type imageLi-Ion 3.7Vflashingindicatingto set the battery type: this momentifshort click the channel button, it can set battery type; ifno operationin5 seconds, it beginsbyautomaticdetectionLi-Ion 3.7V or NIMHthencharging percentage image will flash meaning the start of charging. At the same time the LCD displays also charge voltage, capacity, time and current. When charge completes, it will display100mean while it showsEnd on the LCD right down corner.

LCD displaygraphic reference:

Lii-PD4 Electrical Parameters:

1. Input : AC cable 110-240V 50/60Hz included/  DC 12V 1Aselective

2. Output voltage: DC 4.2V for Li-Ion 3.7V

DC 4.35V for Li-Ion 3.8V IMR

DC 3.65V for LiFePO4

DC 1.48V for NiMH/NI-Cd

3. Output current: Li-Ion/IMR/LiFePO4 2000mA x 1only for slot#4,1000mA x 2, 500mA x 3  500mA x 4

NiMH/NiCd: 1000mA x 2, 500mA x 3  500mA x 4

4. Constant voltage, cut-off current: less than 100mA

5. Standby current: less than 15mA

Compatible battery types and sizes

Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340RCR123, 14500, 10440

NiMH/Cd: AA, AAA,SC, C

Size and weight:

147mm x 100mm x 37mm L x W x H

Weight: approx221g not including AC cable

Lii-500 Specifications:

• DC12V/2A input power.
• 4bay independent ports
• Test the battery capacity

• LCD displays show different modes
• 3 modes of worke
• 4 charging current 300,500, 700, 1000 mAh

• Supports different battery sizes
• Automatic identification of battery type Li-ion, Ni-Mh
• Overcharge protection. Positive and negative reverse connection protection. Over-temperature protection. NiMH battery negative voltage detection -dtv.

• battery fault detection
• 5V 1000mAh USB output discharge

• For NiMH / CD AAA / Micro, AA / mignon, c.
Li-Ion 26650, 22650, 18650.18490, 18500,17500, 17355, 16340 RCR123, 14,500, 10440

Lii-S4 Auto-Polarity Detect Charger
 

This charger is designed for portable, flexible and multi-types of batteries. It can detect automatically the battery polarity, battery types and charge the battery under your selected charging current. Built-in digital tube indicator to display the charging real-time status
  Cautions:
 

This charger can only charge cylindrical rechargeable batteries 3.7V Li-Ion , 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO4
 

Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit
  Use only DC adapter with output 5V min.2A
 

Mind heating while charging; Keep far away from Children.
 

Remove the charger from power source after charging complete, and remove the battery from the charger at the same time
  For indoor use only
 

The displaying data only for reference, please refer to professional instrument for more accurate data
    Features:
   

1. Four-slot independent charging and MCU management system, Micro USB DC 5V input Min.2A
 

2. The most bright point of this charger with battery polarity auto-detection function Any Polarity
 

3.Selective 0.5A/1A/2A charging currents for Lithium batteries by long press the current button. The defaulted current is 0.5A
 

4.Built-in digital tube indicator shows the real-time charging status of channel no. CH, voltage, current, time capacity and battery type Li-Fe 3.20V / Li-ion 3.70V /Li-ion 3.85V IMR; When two channels charging, total current will be no more than 2A when only 1pcs battery inserted, the charging current will be 2A, after the second battery inserted, the current will be automatically lowered to 1A; when charging finish, it shows FULL;
 

5.Identify Li-Ion and Ni-MH battery automatically; Select manually by short-press the mode button for IMR battery3.85V Li-ion andLiFePO4 battery3.2V
 

6.Activation function for 0V battery of PCM protection.
 

7. Will not charge batteries with 0.0≤U<0.2V for NiMH/Cd and 1.65≤U<2.2V for Li-Ion
 

8. Multi-safety protection functions of over-charging, over-discharge, short-circuited and can automatically Identify broken/defective battery will not charge bad batteries;
  9. Charging under constant voltage and current
    Operation instruction:
 

1. Buttons: There's a 'MODE' button separately for each channel choosing the battery types, charging current
  and charging status tracking
 

u Long press the 'MODE' button for 3 seconds to change the charging current for lithium batteries, you can change the charging current at any time
 

u Short press the 'MODE' button to change the charging types of lithium batteries. If no setting, it will default as 1.2V Ni-MH or 3.7V li-ion battery automatically. You need to change the mode for 3.85V li-ion and 3.2V LiFePO4 battery
 

u It begins to charge the battery 5 seconds after your settings
   

2. Charging display: Connect the 5V input port with USB cable, the digital indicator showing
 

the whole information for 2S and null if no battery inserted; after it detects with battery inserted showing channel no, battery voltage and current while the battery type symbol is flashing there will be no battery type symbol flashing function for NiMH/NiCd batteries; then in 5S, it will start to charge with V flashingcharge starts. When the battery is fully charged, it shows Full
   

Digital indicator parameter reference drawing:
      Electrical technical parameters:
  Input: Micro USB DC 5V/2Amin.
 

Output voltage: DC 4.2V 2A x 1pc; 1A x 2pcs; 0.5A x 4pcs for Li-Ion
 

DC 4.35V 2A x 1pc; 1A x 2pcs; 0.5A x 4pcs for IMR
 

DC 3.65V 2A x 1pc; 1A x 2pcs; 0.5A x 4pcs for LeFePO4
  DC 1.48V 500mA for NiMH/NI-Cd
   

Constant voltage charging with cut-off current l ess then 100mA
  Standby current: No more than 15mA
    Compatible for Batteries:
 

Li-ion / IMR/LiFePO4: 26650,20700,18650, 18490, 17700, 17500, 16340RCR123, 14500, 10440
  Ni-MH/Cd: AA, AAA, A, SC, C size
    Sizemm/Weightgrams:
  Length 118mm x Width 100mm x Height 30mm
  136.4 grams charger not included USB cable
    Design and made in China
 

Contact distributor for more information or support

LiitoKala Lii-S1 Specifications
Input: Micro USB DC 5V / 1A min.
Output voltage: DC 4.2V 500mA / 1000mA for Li-Ion
DC 4.35V 500mA / 1000mA for IMR
DC 3.65V 500mA / 1000mA for LeFePO4
DC 1.48V 500mA / 1000mA for NiMH / NI-Cd

Constant voltage charging with cut-off current less then 100mA
Standby current: No more than 15mA

Compatible for Batteries:

Li-ion / IMR / LiFePO4: 26650, 21700,20700, 18650, 18490, 17700, 17500, 16340 RCR123, 14500, 10440
Ni-MH / Cd: AA, AAA, A, SC, C size
  Size mm / Weight grams:
Length 112mm x Width 37mm x Height 32mm

45 grams charger + 17grams USB cable included in delivery

Features:

1, One-slot charging and management system, Micro USB DC 5V input port
2, Battery polarity auto-detection Any Polarity

3, 500mAh / 1000mAh charging current for selection

4, Built-in digital tube indicator shows the real-time charging status of voltage and current

5, Identify Li-ion and Ni-MH battery automatically

Select manually by short-press the mode button for IMR battery 3.85V Li-ion and LiFePO4 battery 3.2V

6, Activation function for 0V battery of PCM protection.

7, Can not charge battery with 0.0 ≦ U <0.2V for NiMH / Cd and 1.6 ≦ U <2.2V for Li-Ion
8, Over-charging and over-discharge protection
9, Identify broken / defective battery
10, Charging under constant voltage and current

Operation instruction:

There's a 'MODE' button for choosing the battery types and charging current

Long press the 'MODE' button for 3 seconds to change the charging current, you can change the charging current at any time

Short press the 'MODE' button to change the charging types of lithium batteries. If no setting, it will default as 1.2V Ni-MH or 3.7V li-ion battery automatically. You need to change the mode for 3.85V li-ion and 3.2V LiFePO4 battery

It begins to charge the battery 5 seconds after your settings

When the battery is inserted or defective battery is inserted, the charger will have no any response showing null ; When the battery is fully charged, it shows Full

It can display the battery voltage and charge current by short press the 'MODE' button at any time during charging
  LiitoKala Lii-S1

Lii-S2 Electrical Parameters:

1.Input : Micro USB DC 5V/2Amin.

2.Output voltage: DC 4.2V for Li-Ion 3.70V

                    DC 4.35V for Li-Ion 3.85V IMR

                    DC 3.65V for LiFePO4

                    DC 1.48V for NiMH/NI-Cd

3.Output current: Li-Ion/IMR/LiFePO4 2000mA x 1only for slot#4,

1000mA x 2/500mA x 2

NiMH/NiCd:  500mA

4.Constant voltage, cut-off current: less than 100mA;

5.Standby current: less than 15mA.

Compatible battery types and sizes

Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340RCR123, 14500, 10440

NiMH/Cd: AA, AAA,SC, C

Size and weight:

133mm x 100mm x 35mm L x W x H

Weight: approx175g

Cautions:

This charger can charge all cylindrical rechargeable batteries 3.7V Li-Ion , 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO4

Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit

If DC input, only 12V 1A is recommended

Mind heating while charging

Remove the charger from power source after charging complete, and remove the battery from the charger at the same time

For indoor use only

The displaying data only for reference, please refer to professional instrument for more accurate data

Specifications and functions:

1. Multi-power input: AC cable 110-240V 50/60Hz included/ 12V 1A adapterselective, four independent charging and micro computer management system.

2. Charge current intelligent auto-set of total three levels: 500mA /1000mA/2000mA,2000mA is fixed only for slot#4.

3. Multi-functional LED charging indicators: for charging progress: 25 – 50 – 75 -100 , battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V IMR and for charging current: 0.5A/1A/2A

4. Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteriesIMR

5. Refresh for OV battery. It will not charge any battery of1.65 -2.20V refresh current can be detected only

6. Multi-safety protection function of over-charge and over-discharge, short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.

7. Charging  at constant voltage and current

Button and LED :

1. Button of Mode: While power supply is connected,  1 Short click the mode button to change the battery type. It will start to charge 5 seconds after setting the battery type 3.2V or 3.80V,  1.2V Ni-MH and 3.7V li-ion can be detected automatically, so it needs setting only 3.2V and 3.8V batteries; 2 During charging process, short click the mode button to display battery type.

Note: Battery type can be only selective before charging starts.

2. LED: While power supply connected, all LEDS light up immediately  1 If no battery is inserted, the 500mAh LED one of the three current display LEDS will keep on and others will be off.  2 When battery is inserted and detected, 4 LED charging indicator for the channel will be on among which 3.7V battery type LED keeps flashing indicating to set the battery type, if no operation in 5 seconds, it begins by automatic detectionLi-Ion 3.7V or NIMH  then four LED indicators will display the charging status. 3 During charging, short click the Mode button to show the battery type within 5 seconds; 4 If no power supply is connected, inserting a battery, it can quick shows the remaining charger volume of the battery.

x LED display graphic reference: